The Fertilisers and Chemicals Travancore Limited (FACT) released the FACT Recruitment 2026 notification on 07 May 2026. There are 34 open positions across various engineering disciplines, including Draughtsman, Engineer, Deputy Manager, and more.
Eligible applicants can submit their online applications from 07 May 2026 until 21 May 2026. The application process requires candidates to meet specific qualifications and age criteria as of 01 May 2026. For more details, visit https://fact.co.in/.
FACT FEDO Engineering Contract Recruitment 2026 Overview
| Particulars | Details |
|---|---|
| Organization Name | The Fertilisers and Chemicals Travancore Limited (FACT), Schedule ‘A’ multi-divisional Central PSU |
| Recruitment Notification No. | 01/2026 dated 07/05/2026 |
| Organisation / Project | FACT Engineering and Design Organisation (FEDO) or any projects of FACT/FEDO |
| Post Codes | Post Codes 1 to 34 – Draughtsman, Senior Draughtsman, Engineer Design, Deputy Manager Design, Senior Manager Design, Assistant General Manager Design (across Chemical, Mechanical-Piping, Electrical, Instrumentation, Civil, and Estimation disciplines) |
| Type of Engagement | Temporary Contract basis – for a term of 1 year or till completion of the project, whichever is earlier; renewable at Management’s discretion |
| Application Mode | Online Form submission + Physical Application by Speed Post/Registered Post |
| Selection Mode | Skill Test in Engineering Drafting Software (for Draughtsman posts, codes 1-6) + Interview (for Engineer/Deputy Manager/Senior Manager/AGM posts, codes 7-34) |
| Eligibility Calculated As On | 01.05.2026 |
| Official Website | https://fact.co.in/ |
FACT FEDO Engineering Contract Recruitment 2026 Important Dates
| Event | Date |
|---|---|
| Date of Recruitment Notification | 07/05/2026 |
| Last Date for Submission of Online Form | 21/05/2026 (4:00 PM) |
| Last Date for Physical Application (by Speed Post/Registered Post) to reach FACT | 28/05/2026 |
| Age & Experience Eligibility Calculated As On | 01/05/2026 |
| Skill Test / Interview Date | To be notified on the FACT website https://fact.co.in/ |
FACT FEDO Engineering Contract Recruitment 2026 – Vacancy Details & Specifications
Applications are invited for the preparation of a panel for 34 post codes across engineering and design disciplines for engagement in FEDO or any projects of FACT/FEDO on a temporary contract basis. Merit lists for each post will be prepared separately for UR, SC, ST, OBC, and EWS categories, and candidates belonging to all categories are encouraged to apply.
| Post Code | Post Name | Minimum Qualification | Experience Required |
|---|---|---|---|
| 1 | Draughtsman (Chemical) | Diploma in Chemical Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years of experience in Design & Drafting of PFDs, P&IDs & Process Specifications in Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia project drawings using AutoCAD. |
| 2 | Draughtsman (Mechanical-Piping) | Diploma in Mechanical Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years experience in Design & Drafting of piping drawings using AutoCAD for projects in Oil & Gas/Fertiliser/Chemical industries; experience in preparation of layouts, Key plans, Isometric drawings, bill of quantities, etc. (Knowledge in 3D modeling using Cardworx plant software is desirable). |
| 3 | Draughtsman (Electrical) | Diploma in Electrical/Electrical and Electronics Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years of experience in the preparation of single line diagrams, General arrangement drawings of substation buildings, power layout, earthing layout, lighting layout, etc., using CAD software, and preparation of BOQ for erection tenders. |
| 4 | Draughtsman (Instrumentation) | Diploma in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 1 / (b) 2 / (c) 3 / (d) 5 years of experience in the preparation of engineering drawings using CAD software and the preparation of BOQ for erection tenders. |
| 5 | Draughtsman (Civil) | Diploma in Civil Engineering/Architecture | (a) 1 / (b) 2 / (c) 3 / (d) 5 years of experience in the preparation of Civil general arrangement/Structural drawings of RCC or Steel Structures using CAD software. |
| 6 | Sr. Draughtsman (Civil) | Diploma in Civil Engineering/Architecture | (a) 8 / (b) 10 years of experience in the preparation of Civil general arrangement/Structural drawings of RCC or Steel Structures using CAD software. |
| 7 | Engineer Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | (a) 1 / (b) 2 / (c) 3 years of experience in Process Design and Detailing Engineering, involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands-on experience in process simulation and/or design software will be an added advantage. |
| 8 | Engineer (Design Piping) | Degree in Mechanical Engineering | (a) 1 / (b) 2 / (c) 3 years of experience in developing piping layouts, equipment layouts, piping isometrics, material take-offs (MTO), and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD is preferred. |
| 9 | Engineer (Design-Mechanical) | Degree in Mechanical Engineering | (a) 1 / (b) 2 / (c) 3 years of experience in design consultancy/EPCs in basic Engineering of Machinery such as pumps, compressors, etc. Proficient in finalization of Procurement specifications, tender documents, BOQ, and review of vendor documents/drawings. |
| 10 | Engineer Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | (a) 1 / (b) 2 / (c) 3 years of experience in an engineering consultancy firm in designing EHV/HV power distribution systems, sizing calculations, earthing systems, lightning protection, lighting, BOQ for erection contracts, procurement specifications, and vendor drawing review. Basic knowledge of drawing SLD, power, and earthing layout in AutoCAD is required. |
| 11 | Engineer Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 1 / (b) 2 / (c) 3 years of experience in an engineering consultancy or EPC firm in the design of instrumentation systems, including field instruments, control systems, automation projects; BOQ for the erection contract, procurement specifications, and vendor drawing review. |
| 12 | Engineer Design (Civil) | Degree in Civil Engineering | (a) 1 / (b) 2 / (c) 3 years of experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 13 | Engineer Estimation (Civil) | Degree in Civil Engineering | (a) 1 / (b) 2 / (c) 3 years of experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
| 14 | Deputy Manager Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | Minimum 5 years of experience in Process Design and Detailing Engineering involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands-on experience in process simulation and/or design software will be an added advantage. |
| 15 | Deputy Manager (Design Piping) | Degree in Mechanical Engineering | Minimum 5 years of experience in developing piping layouts, equipment layouts, piping isometrics, MTO, and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD is preferred. |
| 16 | Deputy Manager (Design-Mechanical) | Degree in Mechanical Engineering | Minimum 5 years of experience in design consultancy or EPC environment in the design of static equipment such as Pressure Vessels, Storage Tanks, Heat Exchangers. Experience in ASME Sec VIII, API 650/620, and TEMA codes is desirable. Proficiency in PV Elite, AME Tank, and related tools required. |
| 17 | Deputy Manager Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | Minimum 5 years of experience in an engineering consultancy firm in designing EHV/HV power distribution systems, sizing calculations, earthing systems, lightning protection, lighting, BOQ, procurement specifications, and vendor drawing review. Basic knowledge of drawing SLD, power, and earthing layout in AutoCAD is required. |
| 18 | Deputy Manager Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | Minimum 5 years of experience in an engineering consultancy or EPC firm in the design of instrumentation systems, including field instruments, control systems, automation projects, BOQ, procurement specifications, and vendor drawing review. |
| 19 | Deputy Manager Design (Civil) | Degree in Civil Engineering | Minimum 5 years of experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 20 | Deputy Manager Estimation (Civil) | Degree in Civil Engineering | Minimum 5 years of experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
| 21 | Senior Manager Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | (a) 8 / (b) 10 years of experience in Process Design and Detailing Engineering, involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands-on experience in process simulation and/or design software will be an added advantage. |
| 22 | Senior Manager (Design Piping) | Degree in Mechanical Engineering | (a) 8 / (b) 10 years of experience in developing piping layouts, equipment layouts, piping isometrics, MTO, and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD is preferred. |
| 23 | Senior Manager (Design-Mechanical) | Degree in Mechanical Engineering | (a) 8 / (b) 10 years of experience in design consultancy/EPCs in basic Engineering of Machinery such as pumps, compressors, etc. Proficient in finalization of Procurement specifications, tender documents, BOQ, and review of vendor documents/drawings. |
| 24 | Senior Manager Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | (a) 8 / (b) 10 years of experience in an engineering consultancy firm in designing EHV/HV power distribution systems, sizing calculations, earthing systems, lightning protection, lighting, BOQ, procurement specifications, and vendor drawing review. Basic knowledge of drawing SLD, power, and earthing layout in AutoCAD is required. |
| 25 | Senior Manager Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 8 / (b) 10 years of experience in an engineering consultancy or EPC firm in the design of instrumentation systems, including field instruments, control systems, automation projects, BOQ, procurement specifications, and vendor drawing review. |
| 26 | Senior Manager Design (Civil) | Degree in Civil Engineering | (a) 8 / (b) 10 years of experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 27 | Senior Manager Estimation (Civil) | Degree in Civil Engineering | (a) 8 / (b) 10 years of experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
| 28 | Assistant General Manager Design (Process) | Degree in Chemical Engineering/Petrochemical Engineering/Chemical Technology/Petrochemical Technology/Petroleum Refining & Petrochemical Engineering/Polymer Technology | (a) 12 / (b) 15 years of experience in Process Design and Detailing Engineering, involving preparation of PFDs, P&IDs & Process Specifications in the field of Fertiliser/Refinery/Oil & Gas/Petrochemicals/CBG/Green Hydrogen/Green Ammonia projects. Hands-on experience in process simulation and/or design software will be an added advantage. |
| 29 | Assistant General Manager (Design Piping) | Degree in Mechanical Engineering | (a) 12 / (b) 15 years of experience in developing piping layouts, equipment layouts, piping isometrics, MTO, and preparing technical procurement specifications for piping materials. Experience in ASME Code B31.3 is desirable; knowledge of AutoCAD is preferred. |
| 30 | Assistant General Manager (Design-Mechanical) | Degree in Mechanical Engineering | (a) 12 / (b) 15 years of experience in design consultancy/EPCs in basic Engineering of Machinery such as pumps, compressors, etc. Proficient in finalization of Procurement specifications, tender documents, BOQ, and review of vendor documents/drawings. |
| 31 | Assistant General Manager Design (Electrical) | Degree in Electrical/Electrical & Electronics/Electrical & Instrumentation Engineering | (a) 12 / (b) 15 years of experience in an engineering consultancy or EPC firm in designing EHV/HV power distribution systems, sizing calculations, earthing systems, lightning protection, lighting, BOQ approvals, procurement specifications, and vendor drawing review. |
| 32 | Assistant General Manager Design (Instrumentation) | Degree in Instrumentation/Instrumentation & Control/Electronics & Instrumentation/Electrical & Instrumentation Engineering | (a) 12 / (b) 15 years of experience in an engineering consultancy or EPC firm in the design of instrumentation systems, including field instruments, control systems, automation projects, BOQ, procurement specifications, and vendor drawing review. |
| 33 | Assistant General Manager Design (Civil) | Degree in Civil Engineering | (a) 12 / (b) 15 years of experience in Structural Design of RCC/Steel structures. Post-graduation in Structural Design is desirable. Proficient in STAAD-Pro or ETABS Software and Indian Design Codes. |
| 34 | Assistant General Manager Estimation (Civil) | Degree in Civil Engineering | (a) 12 / (b) 15 years of experience in Quantity Estimation/Measurements & Billing/Specification Preparation/Rate Analysis for Civil and RCC works. |
FACT FEDO Engineering Contract Recruitment 2026 – Age Limit
The relevant date to determine eligibility on experience and age is 01.05.2026. The Std X certificate, having the date of birth, shall only be considered as proof of date of birth. Relaxation in the maximum age limit is permissible for reserved posts as per Government directives.
| Post Category | Post Codes | Maximum Age (as on 01.05.2026) | Date of Birth Range |
|---|---|---|---|
| Draughtsman / Engineer / Deputy Manager | 1 to 5 and 7 to 20 | 35 Years | Born between 01.05.1991 and 30.04.2008 |
| Senior Draughtsman / Senior Manager | 6 and 21 to 27 | 45 Years | Born between 01.05.1981 and 30.04.2008 |
| Assistant General Manager | 28 to 34 | 50 Years | Born between 01.05.1976 and 30.04.2008 |
FACT FEDO Engineering Contract Recruitment 2026 – Remuneration
The remuneration for the posts will be on a consolidated basis as detailed below. Payment of higher consolidated pay will be considered for those with higher relevant experience, at a rate of 3% for each completed year of additional relevant experience over and above the minimum experience given under ‘Specification’ of each Post, subject to the maximum consolidated pay indicated. An annual increase of 3% on applicable consolidated pay will be paid, subject to renewal of contract engagement.
| Post / Experience Level | Consolidated Pay (Rs.) | Maximum Consolidated Pay (Rs.) |
|---|---|---|
| Draughtsman (1 year experience) | 25,750 | 32,660 |
| Draughtsman (2 years of experience) | 26,530 | 33,640 |
| Draughtsman (3 years of experience) | 27,330 | 34,650 |
| Draughtsman (5 years of experience) | 29,000 | 36,770 |
| Senior Draughtsman (8 years of experience) | 31,700 | 40,200 |
| Senior Draughtsman (10 years of experience) | 34,650 | 42,660 |
| Engineer Design in all disciplines/Estimation (Civil) (1 year experience) | 35,520 | 44,400 |
| Engineer Design in all disciplines/Estimation (Civil) (2 years of experience) | 36,590 | 45,740 |
| Engineer Design in all disciplines/Estimation (Civil) (3-year experience) | 37,690 | 47,120 |
| Deputy Manager Design in all disciplines/Estimation (Civil) (5 years of experience) | 40,000 | 50,000 |
| Senior Manager Design in all disciplines/Estimation (Civil) (8 years of experience) | 43,720 | 54,650 |
| Senior Manager Design in all disciplines/Estimation (Civil) (10 years of experience) | 46,400 | 57,980 |
| Assistant General Manager Design in all disciplines/Estimation (Civil) (12 years of experience) | 49,240 | 61,520 |
| Assistant General Manager Design in all disciplines/Estimation (Civil) (15 years of experience) | 53,820 | 67,240 |
FACT FEDO Engineering Contract Recruitment 2026 – Selection Process
The decision of the Management about the mode of selection, requirements, eligibility criteria, shortlisting of candidates, etc., shall be final and binding. No correspondence will be entertained in this regard. Meeting the eligibility criteria or attending or being successful in a skill test/interview does not by itself confer any right on the candidate for selection or inclusion in the Panel.
| Post Codes | Mode of Selection | Details |
|---|---|---|
| 1 to 6 (Draughtsman / Senior Draughtsman) | Skill Test in Engineering Drafting Software | Candidates successful in the practical/skill test will be assessed and ranked on the basis of marks scored. Tie-breaking criteria (in order): (a) Completed years of relevant experience; (b) Earlier year of passing the relevant qualification (Diploma certificate); (c) Earlier date of birth. |
| 7 to 34 (Engineer / Deputy Manager / Senior Manager / AGM) | Interview | Selection will be based on marks scored in the Interview. |
How to Apply for FACT FEDO Engineering Contract Recruitment 2026
Click the official apply link below.
Important Instructions for FACT FEDO Engineering Recruitment 2026 Candidates
- Two-step application is mandatory – both Online Form submission AND physical application by Speed Post/Registered Post are compulsory; failure of either step will result in rejection.
- Only full-time regular courses will be considered for prescribed educational qualifications – qualifications acquired through part-time/correspondence/distance/private study/off-campus will not be considered.
- Only post-qualification experience will be considered for all posts. One year of Apprenticeship training will also be considered as experience on the production of a COP issued by the Board of Apprenticeship Training.
- Candidates may apply for one or more of the specified experience levels and must indicate their preference – only the specific experience level(s) preferred in the application will be considered.
- Candidates wishing to apply for more than one post must submit separate online applications and send separate applications with documents to HR for each post.
- Candidates shall be willing to work at the site based on project requirements.
- Engagement is only for a fixed term against specific projects and will not confer any right for extension, permanent appointment, or preferential treatment in any future appointment.
- Candidates already engaged in FACT as work-charged employees in a particular project shall not be considered for appointment from a new merit panel.
- EWS candidates shall submit the EWS certificate of the relevant year (income of 2025-26). OBC-NCL candidates shall submit the OBC-NCL certificate and self-declaration along with the application.
- Candidates will be required to undergo a pre-employment medical examination – only those certified fit by the Company’s Medical Officer will be offered an appointment. No relaxation in Medical/Physical standards will be allowed.
- All further notifications shall be through the Company website https://fact.co.in/ – individual communications may not be sent; all communications will be only through the email ID used for submitting the Online Form. Candidates must keep the said email ID valid and functional at all times.
- Any dispute with regard to recruitment against this notification will be settled in courts within the jurisdiction of Ernakulam, Kerala State only.
FACT Draughtsman, Engineer, and More Important Links
| Particulars | Link |
|---|---|
| Application Form | Click here |
| Apply Online | Click here |
| Official Notification PDF | Click here |
| Official Website | Click Here |
Frequently Asked Questions (FAQs)
Q1. When is the deadline to submit my application?
Ans. You have until May 21, 2026, to get your application submitted based on the official schedule.
Q2. How many job openings are there in this recruitment?
Ans. FACT is looking to fill 34 open positions across different engineering disciplines.
Q3. What are the age requirements for these posts?
Ans. The maximum age limit ranges between 35 and 50 years, depending on the specific job. This is calculated as of May 1, 2026.
Q4. How will candidates be selected?
Ans. If you’re applying for Draughtsman roles, there will be a skill test. For engineering and managerial roles, you’ll need to pass an interview.
Q5. Where is the best place to find the official notification?
Ans. You can read and download the complete notification directly from the official FACT website at fact.co.in.
Q6. Do I have to pay an application fee?
Ans. You’ll need to check the official notification to see if your specific category and post require an application fee.
Q7. Can I apply for more than one position?
Ans. Yes, but you must submit completely separate online and physical applications for every post you are interested in.
